Components
1.
Pull the lever
A
with one hand while supporting the
legrest with your other hand.
2.
When a suitable angle is obtained, let go of the lever
and the legrest will lock into one of seven preset
positions
B
.
For the Azalea Max four different positions are
available, see section for legrests Azalea Max.
The distance between the lowest part of the footrest
and the ground must be at least 40 mm.
4.5.2 Adjusting the legrest height
A
1.
Loosen screw
A
with an allen key.
Tools: 5 mm allen key
2.
Adjust the legrest to a suitable height and the screw is
caught by one of the recesses on the legrest tube.
3.
Re-tighten the screw with 8 Nm.
4.6 Fixed legrest
4.6.1 Adjusting the legrest height
A
B
1.
Loosen screw
A
with an allen key.
Don't touch the upper screw
B
.
2.
Adjust the legrest to a suitable height and the screw is
caught by one of the recesses on the legrest tube.
3.
Re-tighten the screw with 8 Nm.
The distance between the lowest part of the footrest
and the ground must be at least 40 mm.
4.7 Adjusting the height of the calf pad
B
1.
Loosen the knob
B
.
2.
Adjust the calf pad to the desired height.
3.
Re-tighten the knob
B
.
4.8 Footrests
4.8.1 Adjusting the angle adjustable foot plates
The foot plates can be adjusted both in depth and angle,
and can also be folded-up.
A
1.
Adjust the angle and the depth by loosening the screw
A
at the foot plate attachment.
Tools: 5 mm Allen key
2.
Adjust the foot plate to the correct position.
3.
Re-tighten the screw with 10 Nm.
Do not place anything on the foot plate when the
screw is loose.
4.9 Tires
The ideal pressure depends on the tire type:
The table below is an indication. In case the tire differs from
the list below, check the side of the tire, the maximum
pressure is listed there.
Tire
Max. pressure
Pneumatic 24 x 1
3/8 x 1 1/4
4,5 bar
65 psi
Pneumatic 24 x 1
3/8
4,5 bar
65 psi
Pneumatic low
profile
7,5 bar
110 psi
Low profile PKT
(24x1)
—
—
1439960-D
13