Rea® Clematis®
4.3.2 Backrest tension adjustable “Laguna”
1.
A
Remove the backrest cover
A
.
2.
B
B
Loosen the hand wheels
B
and adjust to the desired
height.
3.
Re-tighten the hand wheels
B
.
4.
Re-mount the backrest cover
A
.
The push handles may only be adjusted 5 cm when
using “Lateral” cover and the extra support strap.
4.4 Seat
4.4.1 Adjusting the seat depth
A
B
C
1.
Remove the seat cushion
A
.
2.
Loosen the screws
B
.
3.
Push or pull the seat plate
C
backwards or forwards to
the desired position.
The seat can be adjusted 30 mm forwards or
30 mm backwards.
4.
Re-tighten the screws
B
.
5 mm allen key
4.4.2 Seat adjustments
A
B
The seat depth of the chair can easily be adjusted to provide
good support. The width between the legrests and armrests
and the height of the armrests can also be adjusted.
The seat cushion
A
is secured with Velcro® strips
B
on the seat plate.
4.5 Angle adjustable legrest
Angle adjustable legrests support the legs and reduces
pressure. The legrests must always be fitted with calf pads,
foot plates and heel straps. It is important to adjust the
height and angle of the legrests to obtain a good seating
position.
4.5.1 Angle adjustment
WARNING!
Risk of damage
Damage on the mechanism
– Do not place anything heavy, or let children sit
on the legrest. It may cause damage to the
mechanism.
– Do not put any pressure on the legrest while
the angle is being adjusted. The lever must be
fully opened.
A
B
12
1439960-D