background image

Invacare Rea AB

Växjövägen 303 S-343 71 DIÖ SWEDEN

United Kingdom:

Invacare (UK) Ltd.
South Road, Bridgend Industrial 
Estate 
Bridgend
County Borough of Bridgend CF31 
3PY
United Kingdom
Tel.: +44 1656 664 321
Fax.: +44 1656 667 53

Belgium:

Invacare n.v.
Autobaan 14
B-8210 Loppern, Brügge
Tel. +32 - 50 83 10 10
Fax. +32 - 50 83 10 11

Denmark:

Invacare A/S
Sdr. Ringvej  39
DK-2605 Brøndby
Tel.  +45 - 36 90 00 00
Fax. +45 - 36 90 00 01

Finland:

Inva Apuväline  OY
Kumpulantie 1
00520 HELSINKI
Tel. +358 (09) 22 95 40
Fax +358 (09) 229 544 04

France:

Invacare Poirier S.A
Les Roches
F.37230 Fondettes
Tel. +33 - 02 47 62 64 66
Fax. +33 - 02 47 62 64 10

Germany:

Austria, Switzerland 
and Eastern Europe.

Invacare GmbH
Dehmer Strasse 66
D-32549 Bad Oeynhausen
Tel. +49 - 57 31 754 0
Fax. +49 - 57 31 754 150

Holland:

Invacare B.V.
Celsiusstraat 46 / P.O. Box 123
NL-6710 BC Ede
Tel. +31 - 318 695757
Fax. +31 - 318 695758

Italy:

Mecc san SARL
Via Ddei Pini, 64
IT- 36016 Thiene VI
Tel. +39 - 445 380059
Fax. +39 - 445 380034

Norway:

Invacare AS
Grensevingen 9
P.O. Box 6230 / Etterstad
N-0603 OSLO 6
Tel. +47 - 22 57 95 00 
Fax. +47 - 22 57 95 01

Portugal:

Invacare Lda
Rua Senhora de Campanhâ
PT- 4369-001 Porto
Tel. +35 - 12 510 59 46 
Fax. +35 - 12 510 57 39

Spain:

Invacare S.A
C/Areny, s/n
Polígon Industrial de Celerá
S- 17460 Celrá (Girona)
Tel. +34 - 972 493200
Fax. +34 - 972 493220

Sweden:

Invacare AB
Fagerstagatan 9 / Box 66
S-163 91 Spånga
Tel. +46 - 8 761 70 90
Fax. +46 - 8 761 81 08

Failure to comply can result in personal injury and/or 
damage to the wheelchair.
Those fitting accessories should ensure that:
•  They are careful not to trap their fingers when car-

rying out assembly work.

•  They are careful to ensure that all knobs, screws 

and nuts are properly tightened.

•  They are careful to ensure that the drive wheels are 

properly fixed to the wheelchair.

For further information regarding the wheelchair model 
shown in this assembly manual refer to the model’s 
main manual.

THIS SYMBOL MEANS WARNING.

Sales companies:

Manufacturer: 

Ar

t.nr

. 1428272 

 02.06

Illustrationsbolaget AB, 

Växjö, Sw

eden

Summary of Contents for rea Bellis

























Reviews: