Invacare rea Bellis, Assembly Instructions Manual

Page: 15 / 24

15
REA BELLIS
A
C
B
C
C
1.
2.
1. To replace the push bar with a push handle
bar, you must fi rst remove the handles for the
backrest tilt and the seat tilt adjustments. The
tilt handles must be moved from the push bar to
the push handle bar.
Start by loosening both of the screws (A) and
removing the backrest tilt handle from its
attachment. Then remove the attachment with
the screw (B).
Do the same with the seat tilt handle and its
attachment.
Loosen both levers (C) and remove the push bar.
Fit the new push handle bar, adjust to the required
height and lock into place using the levers (C).
Fit the attachments, the backrest tilt handles and
seat tilt handles as before.
NB! To ensure that both tilt handles fit
onto the push handle bar, they must be
angled outwards slightly, unlike their earlier
positioning on the push bar.
3. Adjust the height of the push handles brace/push
bar by loosening the levers (A) and then moving
the push handles brace/push bar upwards or
downwards until you have reached the desired
height. Then retighten the levers.
The push handles brace must not be pulled
up so that it protrudes more than 19 cm
over the top edge of the attachment.
Tools: 2,5 mm Allen Key
screwdriver
Remove the push bar and
fi t a push handle brace