•
Directly on the seat brackets.
•
On a seat plate.
•
On a seat plate with a wedge.
•
With the H-bracket.
Contact your Invacare dealer for more information.
CAUTION!
Risk of damage
The one-piece moulded seat attachments might
break.
– The back should not be reclined when the
Azalea Base is equipped with one-piece
moulded seat attachments.
4.15 Calf strap padded
1.
Mount the calf strap on the legrest.
2.
Wrap the end parts around the legrest tube.
3.
Fixate the self-gripping parts.
Both legrests must be in the same angle in order to
be able to use the calf strap in the correct way.
The calf strap must not slacken to much in order to
give the proper support for the user.
4.16 Heel strap — Azalea Max
1.
Mount the heel strap above the foot plates.
2.
Wrap the end parts around the legrest tube.
3.
Fixate the self-gripping parts.
The heel strap must not slacken to much in order to
give the proper support for the user
4.17 Brake extended — Azalea Max
CAUTION!
Risk of disengaging the brake
– The extended brake handle is angled outwards.
Be careful not to disengage the brake by
mistake.
For Azalea Max, there is a possibility to order a brake with
an extended brake handle.
For adjustments, see:
6.2.1 Using the User Operated Brake,
A
A
Brake lever
4.18 Cover for footrest / foot plate
CAUTION!
Risk of imbalance
– The cover must be removed before the foot
plate is fixed in a raised position.
4.18.1 Attaching a cover to the single foot plate
1.
Thread the foot plate cover onto the foot plate.
2.
Secure the hook strips to fasten the cover on the foot
plate.
4.18.2 Attaching a cover to the one-piece
footrest
A
1.
Detach the pre-glued hook tapes
A
from the cover.
2
x
A
B
2.
Remove the safety paper
B
from the pre-glued hook
tapes
A
.
1488727-R
29
Summary of Contents for rea azalea assist
Page 59: ...Notes...
