![background image](http://html1.mh-extra.com/html/invacare/rea-azalea-assist/rea-azalea-assist_user-manual_2083567034.webp)
Rea® Azalea®
1.
Remove the screws for the headrest attachment
A
and
discard them.
2.
Position washers and harness as shown above.
3.
Insert new screws
C
through the eyelets into the
attachment
B
.
4.
Tighten the screws.
5.
To mount the lower straps, loosen the armrest
attachments with the screws
D
under the seat.
6.
Pull out the attachments approx. 5 cm.
The strap-mountings should be fastened from
the inside of the frame (see above).
7.
Insert the screw
D
through the eyelet and into the hole
in the frame.
Tools: 5 mm Allen key
8.
Secure with the washer and nut
E
.
9.
Put the armrest attachment back in its original place.
4.24.3 Harness attachment — Azalea Base
A
B
1.
Loosen the handwheels for the push handles
A
.
2.
Fit the harness attachment device
B
.
3.
Put the handwheels back and tighten.
34
1488727-R
Summary of Contents for rea azalea assist
Page 59: ...Notes...