SECTION 6—VAN SEAT
Pronto® Series
50
Part No. 1125075
FIGURE 6.2
Adjusting the Back Angle - Fold Down Back Angle
Adjusting the Headrest (Semi-Recline Only)
NOTE: For this procedure, refer to FIGURE 6.3.
1. To raise the headrest, lift the headrest up to the desired position.
2. To lower the headrest, push the release tab towards the front of the wheelchair. Lower
the headrest to the desired position.
FIGURE 6.3
Adjusting the Headrest (Semi-Recline Only)
Removing/Installing the Seat Assembly
NOTE: For this procedure, refer to FIGURE 6.4 on page 51.
Removing
1. Disconnect the joystick. Refer to Disconnecting/Connecting the Joystick on page 123.
2. Fold down the seat back.
3. Pull the seat lever up and lift the seat assembly up and away from the seat post.
Installing
1. Align the seat pivot with the seat post.
2. Pull the seat lever up and lower the seat assembly on the seat post.
Seat Hinge
Locknut
Shoulder
Bolt
DETAIL “A”
100°
95°
110°
105°
Shoulder
Bolt
Headrest
Release Tab
Headrest
Tube
