SECTION 5—ARMS
Pronto® Series
46
Part No. 1125075
FIGURE 5.2
Adjusting Van Seat Arm Height (Adjustable Height Arms Only)
Replacing Van Seat Armrest Assembly
NOTE: For this procedure, refer to FIGURE 5.3.
1. If necessary, remove the joystick. Removing/Installing the Joystick on page 120.
2. Remove the mounting screw, washers and locknut that secure the existing armrest
assembly to the arm post.
3. Position the new armrest assembly on the armrest post and secure with the mounting
screw, washers, and locknut. Refer to FIGURE 5.3
for correct hardware orientation.
4. If necessary, install the joystick. Removing/Installing the Joystick on page 120.
5. Repeat STEPS 1-4
for the opposite armrest assembly, if necessary.
FIGURE 5.3
Replacing Van Seat Armrest Assembly
Angle
Height
Height
Adjustment
Holes
Lock Knob
Arm Frame
Assembly
Armrest
Pinch Point
Jam Nut
Count Exposed Threads
Armrest
Socket Screw
Mounting Screw
Arm Post
Locknut
Armrest
Assembly
Washers
Washer
