Invacare PreciseR
x
™ Pediatric Flowmeter
6
Part No 2001105
Setting The Flowrate On The Pediatric Flowmeter
1.
Set the pediatric flowmeter to the setting prescribed by your physician.
2.
Center the ball of the Pediatric Flowmeter with the line of the prescribed flowrate. This will ensure
an accurate flowrate.
3.
Place cannula on the patient.
FIGURE 3
Setting The Flowrate On The Pediatric Flowmeter
5 Care and Maintenance
5.1
Cleaning
The unit can be cleaned with warm soapy water. Rinse with a soft damp cloth and dry thoroughly.
The humidifier bottle MUST be cleaned after each use.
Humidifier bottle and tubing MUST be changed after each patient.
5.2
Service and Preventative Maintenance
The PreciseR
x
™ Pediatric Flowmeter is specifically designed to minimize routine preventive
maintenance.
If damage to the unit is suspected, or if for any reason flow accuracy is in question, Invacare recommends
returning the unit to Invacare for calibration by qualified personnel.
For this procedure, refer to FIGURE 3.
WARNING
DO NOT select a different setting unless your physician has prescribed a change in the
flowrate of the PreciseR
X
Pediatric Flowmeter.
CAUTION
DO NOT allow water or other substances to enter flowmeter openings. DO NOT
submerge flow stand, flowmeter or tubing.
Flowrate on the standard concentrator flowmeter will drop below the 2.0 L/min. setting
after the Invacare PreciseR
X
Pediatric Flowmeter is installed and operating.
CAUTION
DO NOT allow water or other substances to enter flowmeter openings. DO NOT
submerge flow stand, flowmeter or tubing.
Flowmeter
Ball