background image

SECTION 5—SAFETY INSPECTION/TROUBLESHOOTING

Part No. 1106645

31

R51™and R51LXP

Checking Battery Charge Level

The following “Do’s” and “Don’ts” are provided for your convenience and safety.

DON’T

DO

Don’t perform any installation or maintenance 
without first reading this manual.

Read and understand this manual and any service informa-
tion that accompanies a battery and charger before operat-
ing the wheelchair.

Don’t perform installation or maintenance of bat-
teries in an area that could be damaged by bat-
tery spills.

Move the wheelchair to a work area before cleaning termi-
nals, or opening battery box.

Don’t make it a habit to discharge batteries to 
the lowest level.

Recharge as frequently as possible to maintain a high charge 
level and extend battery life.

Don’t use randomly chosen batteries or chargers.

Follow recommendations in this manual when selecting a 
battery or charger.

Don’t put new batteries into service before 
charging.

Fully charge a new battery before using.

Don’t tip or tilt batteries.

Use a carrying strap to remove, move or install a battery.

Don’t tap on clamps and terminals with tools.

Push battery clamps on the terminals. Spread clamps wider if 
necessary.

Don’t mismatch your battery and chargers.

Use ONLY a GEL charger for a GEL battery.

Summary of Contents for Nutron R51

















































































Reviews: