SECTION 5—SAFETY INSPECTION/TROUBLESHOOTING
R51™and R51LXP
28
Part No. 1106645
Inspect/Adjust Weekly
❑
Inspect tires for flat spots and wear.
❑
Ensure that casters are free of debris.
Inspect/Adjust Monthly
❑
Ensure arm pivot points are free of wear and looseness.
❑
Ensure wheel mounting bolts are secure on drive wheels.
❑
Ensure no excessive side movement or binding when drive wheels are lifted and spun
when disengaged (free-wheeling).
❑
Ensure wheel/fork assembly has proper tension when caster is spun. Caster should
come to a gradual stop.
CAUTION
As with any vehicle, wheels and tires should be checked periodically for cracks and
wear and should be replaced as necessary.
❑
Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.
❑
Ensure all caster/wheel/fork/headtube fasteners are secure.
❑
Inspect for any loose hardware on the wheelchair.
❑
Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify
hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
❑
Ensure that casters are free of debris.
Inspect/Adjust Periodically
❑
Ensure wheelchair rolls straight (no excessive drag or pull to one side).
❑
Ensure arms are secure but easy to release and adjustment levers engage properly.
❑
Ensure adjustable height arms operate and lock securely.
❑
Ensure armrest pads sit flush against arm tubes.
❑
Inspect seat and back upholstery for rips or sagging.
❑
Ensure seat release latch is not worn. Replace if necessary.
❑
Clean upholstery and armrests.
❑
Inspect charger AC power cord for damage. Replace if necessary.
❑
Check that all labels are present and legible. Replace if necessary.
❑
Ensure that casters are free of debris.
❑
Inspect electrical componenets for signs of corrosion. Replace if corroded or damaged.
