4 DUAL MOUNT
17
7.
Repeat STEPS 1-6 to install the back onto the remaining band clamp.
8.
Adjust the back shell
I
so it is centered between the back canes
J
.
9.
Tighten the eight screws
K
securing the angle adjustable brackets
H
to the back shell.
4.8
Adjusting the Back Height
1.
Loosen the compression bar hardware
A
.
2.
Adjust the back to the desired height.
3.
Tighten the compression bar hardware to secure the clamp bodies
B
in place.
It may be necessary to slide the angle adjustable brackets
H
to allow the clamp body to properly align with the band
clamp.
H
J
I
J
K
Height adjustments must be made equally on both back
canes.
When re-tightening the compression bar hardware,
alternate back and forth between the screws until the
compression bar is fully secured.
B
A
