Invacare Matrx E2 BACK User Manual Download Page 8

- 8 -

4.4  DISPOSAL

5.0  W

ARRANTY

 I

NFORMATION

The disposal and recycling of used devices and packaging must comply with the 
applicable local legal regulations.
Ensure that the cushion is cleaned prior to disposal to avoid any risk of contamination.

This product is suitable for re-use. The outer cover (fabric and foam), back shell 

and mounting hardware must be inspected by a qualified dealer or healthcare 

professional before re-use. 

     WARNING! 

Risk of Injury

• Always have an authorized dealer inspect the product for damage or wear PRIOR to 
transferring the product to a different user. If any damage is found, DO NOT RE-USE 
this product.  Failure to heed these warnings may result in severe injury.
• PRIOR to reuse, clean and disinfect the product thoroughly, per section 

4.2 

Cleaning & Disinfection

, and in accordance with local government regulations.

4.3  REUSE/RECYCLING

Polyurethane (PU) coated fabrics can absorb liquids for short periods causing a 
temporary change to the PU characteristics. The wet cover is more vulnerable to 
physical damage and should not be used until fully dried.

i

WARRANTY

PLEASE NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH FEDERAL LAW 
APPLICABLE TO PRODUCTS MANUFACTURED AFTER JULY 4, 1975.
This warranty is extended only to the original purchaser/user of our products. This warranty gives you 
specific legal rights and you may also have other legal rights which vary from state to state. Invacare/ 
Motion Concepts warrants this product to be free from defects in materials and workmanship for two 
years of use by original purchaser. This warranty does not apply to punctures, tears or burns, nor to 
the removable cushion cover. If within such warranty period any such product shall be proven to be 
defective, such product shall be repaired or replaced, at Invacare’s/Motion Concepts’ option, with 
refurbished or new parts. This warranty does not include any labor or shipping charges incurred in 
replacement part installation or repair of any such product. Product repairs shall not extend this warranty- 
coverage for repaired product shall end when this limited warranty terminates. Invacare’s/Motion 
Concepts’ sole obligation and your exclusive remedy under this warranty shall be limited to such 
repair and/or replacment. For  warranty service, please contact the dealer from whom you purchased 
your Invacare/Motion Concepts product. In the event you do not receive satisfactory warranty service, 
please write  directly to Invacare/Motion Concepts at the address on the back cover. Provide dealer’s 
name, address, model number, the date of purchase, indicate nature of the defect and, if the product 
is serialized, indicate the serial number.
Invacare Corporation/Motion Concepts will issue a return authorization. The defective unit or parts 
must be returned for warranty inspection using the serial number, when applicable, as identification 
within thirty (30) days of return authorization date.
DO NOT return products to our factory without our prior consent. C.O.D. shipments will be refused; 
please prepay shipping charges.

Summary of Contents for Matrx E2 BACK













Reviews: