- 10 -
6.0 E2 B
ACK
A
CCESSORIES
6.1 E2 HEADREST INTERFACE PLATE
The E2 Headrest Interface Plate (
A
) is included only with E2 Backs for
Back Heights
ranging from
14”
(
36cm
) up to
20”
(
51cm
)
. The E2 headrest interface is compat-
ible with most industry standard headrest mounting hardware, including our
Matrx
Elan Headrest
Hardware (sold separately). The headrest interface plate installs directly
onto the E2S/E2D back shell using the hardware provided
*
.
A
headrest
mounting hardware
(sold separately
)
*NOTE:
Headrest mounting hardware must
be installed onto the E2 Interface Plate
PRIOR
to installation onto the back shell
6.2 E2 LUMBAR SUPPORT
The E2 Lumbar Support (
A
) is included with ALL Matrx E2 Backs. The Lumbar
Support is a pre-fabricated foam insert that provides optional lower back support
for improved positioning and comfort. The lumbar support may be installed inside
the Matrx E2S/E2D cover when desired
(see instructions/images below).
To install the Lumbar Support:
1. Open the outer cover at the bottom rear of the back shell (via the hook and
loop fastener).
2. Install the lumbar support inside the E2 back cover (behind the existing foam pad),
as illustrated below.
3. Refasten the outer cover onto the back shell.
Lumbar Support
(front/face)
Elite E2D Back shown
A
