Invacare Matrx E2 BACK User Manual Download Page 5

- 5 -

     IMPORTANT!

 If the wheelchair and  Invacare

®

 Matrx

®

 E2 Back is  transported 

unoccupied, the wheelchair should be tied down with suitable equipment according to 

the manufacturer’s instructions. If the equipment is dismantled for transportation, 

ensure that all parts are secured safely within the vehicle.

      WARNING!  

Risk of Serious Injury

When establishing the mounting position for the Invacare

®

 Matrx

®

 Back, ensure 

the stability of the wheelchair is not compromised. Adjusting the forward and aft 

position and/or angle of the backrest will alter the user’s center of gravity within 

the wheelchair. It may be necessary to reposition the front casters, rear wheels, 

back angle, tilt-in-space, recline position and/or seat depth before use.

      WARNING! 

Risk of Serious Injury or Damage

• The procedures in this manual should be performed by a qualified technician

• The hardware provided is high strength and tested for durability. 

Do Not substitute

hardware. 

Use only the original hardware supplied with your Matrx back

• Attaching hardware that is loosely secured could cause loss of stability resulting 

in serious injury or damage.

• After ANY adjustments, repair or service and before use, make sure that all 

attaching hardware is tightened securely.

• DO NOT install the Invacare

®

 Matrx

®

 back assembly onto back canes with an 

outside diameter greater than 1” (25mm) or less than 3/4” (19mm). Otherwise, 

injury or damage may occur.
• For power seating applications, the Fixed Mounting Hardware must be used.

      WARNING!

Risk of Injury

Invacare

®

 Matrx

®

 products are specifically designed and manufactured for use 

in conjunction with Invacare

®

 Matrx

®

 accessories. Accessories designed by other 

manufacturers have not been tested by Motion Concepts and are not recommended.

      WARNING  

Risk of Injury

Skin condition should be checked very frequently after the installation of any 

new seating system. Working with your therapist, physician and service provider 

is the best way to assure that a seating choice meets your individual needs.

2.2  GENERAL SAFETY AND INSTALLATION WARNINGS!

      WARNING!

 Risk of Death, Serious Injury, or Damage

Lighted cigarettes dropped onto an upholstered seating system can cause a fire 

resulting in death, serious injury or damage. Wheelchair occupants are at particular

risk of death or serious injury from these fires and resulting fumes because they 

may not have the ability to move away from the wheelchair.
•DO NOT smoke while using this wheelchair

belt (lap belts on their own are not suitable).  Restraints that loop over the shoulder 

and anchor to the vehicle floor should be avoided where possible, as they can 

cause a heavy downward load through the client during an impact, the preferred 

type anchor above and behind the shoulder as with a car seat belt. The lap section 

of the belt should fit snugly over the pelvis of the client and should not be able to 

ride up to the abdominal area. The upper torso section of belt should be in contact

with the client’s chest and fit over the shoulder(s), while not cutting into the neck 

or slipping off the shoulder(s).

 

 

Summary of Contents for Matrx E2 BACK













Reviews: