ContourU™/ Silhouette™Seating Systems
2
Part No 1154276
Product Description
These
Seating
Systems
are
designed
to
fit
a
specific
client
based
on
seating
and
positioning
simulation
performed
on
the
Shape
Sensor.
This
Instruction
Sheet
provides
installation
instructions
for
the
Contour
U
and
Silhouette
Seating
Systems.
Dry Fitting the User
Follow
the
directions
in
the
Shape
Sensor
Manual
(part
number
0900117)
to
dry
fit
the
user.
Use and Maintenance of the Seating System
Back Cover
The
cover
is
properly
installed
when
the
words
ʺ
BOTTOM
OF
BACK
ʺ
(marked
on
inside
of
cover)
is
at
the
bottom
of
the
back.
Seat Cushion Cover
The
cover
is
properly
installed
when
the
zipper
is
at
the
back
of
the
cushion.
In
addition,
the
back
surface
of
the
cushion
is
marked,
“REAR
OF
SEAT”.
Maintaining the Covers
In
the
event
of
incontinence,
some
leakage
may
occur
at
the
seam
stitching,
fastening
straps
or
at
the
zipper,
so
the
water
repellent
coating
should
be
cleaned.
Refer
to
Cleaning.
Inspection
NOTE:
In
order
to
ensure
that
the
seating
system
is
working
as
designed,
inspection
of
the
seating
system
on
a
regular
basis
is
necessary.
WARNING
DO NOT continue to use this product if any deformation, corrosion, breakage, wear and or compres-
sion is found. Corrective maintenance can be performed at or arranged through your equipment sup-
plier.
Visually
inspect
all
parts
weekly,
including
hardware,
upholstery
materials,
foams
(if
accessible),
and
plastics
for
deformation,
corrosion,
breakage,
wear
and/or
compression.
Cleaning
NOTE:
Weekly
cleaning
is
recommended.
The
Seating
System
is
available
with
several
different
covering
options.
Follow
washing
instructions
attached
to
cover.
Keep
all
parts
dry
and
away
from
chemicals
or
lubricants.
To
clean
the
water
repellent
foam
coating,
use
a
soft
cloth
and
wipe
clean
with
warm
water
and
a
mild
soap
solution.
Rinse
off
and
dry.
CAUTION
The cover is designed to protect the foam against a user’s incontinence and to provide fire retardation,
so the cushion must not be used without its cover. If the cover is torn, it must be replaced.
