Invacare Contoura Back, Assembly, Installation And Operating Instructions

Page: 6 / 8

Contoura™ Back and Seat Cushions
6
Part No 1160802
Installing/Removing/Adjusting the Lumbar Support Wedge
NOTE: For this procedure, refer to FIGURE 5.
NOTE: The back cushion cover attaches to the back pan with hook and loop strips.
To install the Lumbar Support Wedge
1. Release the back cushion and cover from the bottom of the back pan.
2. Attach the hook and loop strips on the lumbar support wedge to the hook and loop strips on the back
pan at the desired position. Adjust the lumbar support wedge as necessary.
3. Attach the back cushion cover to the back pan when finished.
To remove or adjust the Lumbar Support Wedge
1. Release the back cushion and cover from the bottom of the back pan and remove or adjust the lumbar
support wedge as necessary.
2. Attach the back cushion cover to the back pan when finished.
FIGURE 5 Installing/Removing/Adjusting the Lumbar Support Wedge
Back Pan
Lumbar Support
Wedge
Back Cushion
and Cover
TOP
BOTTOM
Hook and
Loop Strips