Contoura™ Back and Seat Cushions
4
Installing/Removing the Seat Cushion Cover
WARNING
The cushion cover is designed to protect the foam from moisture and to provide fire retardency. DO
NOT use the cushion without the cushion cover. If the cover is torn, it MUST be replaced
IMMEDIATELY.
NOTE: For this procedure, refer to FIGURE 1.
NOTE: To remove the seat cushion cover, reverse this procedure.
1. Slide the seat cushion into the cushion cover.
2. Zip the cushion cover closed.
3. Reattach cushion onto seating surface. Refer to Attaching/Removing the Seat Cushion To/From Seating
Installing/Removing the Back Cushion
NOTE: For this procedure, refer to FIGURE 2.
NOTE: To remove the back cushion, reverse this procedure.
NOTE: If necessary, remove the head rest to install or remove the back cushion. Refer to the seating system owner’s
manual.
NOTE: Ensure the rectangular opening in the top flap of the back cushion upholstery fits around the headrest mounting
bracket (if present).
1. Put the top flap of the back cushion upholstery over the top of the Contoura back pan.
NOTE: There are no hook-and-loop strips on the back of the mesh back cushion cover. The back of the back cushion cover
will secure to the hook and loop strips on the Contoura back.
2. Secure the cushion to the back frame with the hook-and-loop strips on the front of the Contoura back
and the back of the cushion upholstery.
FIGURE 2
Installing/Removing the Back Cushion
Rear View of
Contoura Back Pan
TOP
BOTTOM
NOTE: Back cover will secure to
the hook-and-loop strips on the
Contoura back.
Top Flap
Hook-and-Loop
Strips
Top Flap
Rear View of
Back Cushion
Back Cushion with
Mesh Cover
Back Cushion with
Vinyl Cover
Rectangular Opening
Rectangular Opening
