3
Contoura™ Back and Seat Cushions
Foam
Wipe the foam with a damp cloth. DO NOT submerge or soak.
Attaching/Removing the Seat Cushion To/From Seating Surface
NOTE: For this procedure, refer to FIGURE 1.
NOTE: To remove the seat cushion from a seating surface, reverse the following procedures.
NOTE: The seat cushion attaches to the seating surface using the hook and loop fasteners on the bottom of the cushion
cover. The seating surface can be seat upholstery, drop base or seat pan.
NOTE: The zipper on the seat cushion MUST ALWAYS face rearward.
WARNING
Make sure the hook and loop fasteners are securely attached to the seating surface and to the seat
BEFORE using. If the cushion is not secured to the seating surface, use caution when transferring in
and out of the wheelchair.
Hook Attachment Strips/No Attachment Strips
1. Remove double sided hook from bottom of cushion.
2. Align front edge of cushion with front edge of seating surface.
3. Perform one of the following:
• Hook Attachment Strips - Secure the cushion to the seating surface, making sure that the strips of
loop on the cushion cover are securely attached to the strips of hook on the seating surface.
• No Attachment Strips - Place the cushion on the seating surface.
Loop Attachment Strips
1. Verify the double sided hook strips are securely attached to the loop attachment strips on the bottom of
the cushion.
2. Align front edge of cushion with front edge of seating surface.
3. Secure the cushion to the seating surface, making sure that the double sided hook is securely attached to
the strips of loop on the cushion cover and the seating surface.
FIGURE 1
Attaching/Removing the Seat Cushion To/From Seating Surface
Zipper
Loop portion of fastening
strap (attached to cushion)
Double-sided hook
portion of fastening strap
(remove backing if necessary
to attach to seating surface)
Seating surface
The front of the cushion
lines up with front edge
of seating surface
Seat Cushion
