Invacare® Comet Series
Note that there may be sections in this user manual, which
are not relevant to your product, since this manual applies
to all existing modules (on the date of printing).
4.2
Moving the seat position forwards or
backwards
The disengaging lever for adjusting the seat is located front right
below the seat.
1.
Pull the lever
A
to disengage the seat.
2.
Slide the seat forwards or backwards into the required position.
3.
Release the lever to lock the seat into the required position.
4.3
Adjusting the armrest width
WARNING!
Serious injury
If one of the armrests is adjusted to a width which
exceeds the permissible value the armrest falls out of its
brackets which could lead to serious injury.
–
The width adjustment is fitted with small stickers with
markings and the word “STOP”. The armrest must
never be pulled out further then the point at which
the word “STOP” is completely legible.
–
Always tighten the fixing screws properly once
adjustments have been completed.
The knobs for releasing the armrests are located under the seat.
1.
Turn the knobs
A
to loosen the fixing for the armrest.
2.
Adjust the armrests to the required width.
3.
Retighten the knobs.
22
1603455-A
Summary of Contents for Comet Series ALPINE Plus
Page 31: ...Accessories Change the front side shroud Change the rear side shroud 1603455 A 31...
Page 61: ...Notes...
Page 62: ...Notes...
Page 63: ...Notes...
