2 SAFETY
Part No 1153410
11
Invacare ®CS Series Beds
Repair or Service Information
Fire Hazard
Ꮨ
DANGER
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely.
DO NOT open assemblies such as the motors, pendant, control boxes or gearboxes. No user serviceable parts are inside.
Only qualified technicians are permitted to repair these parts. If unqualified individuals perform any work on these beds, the
warranty is void.
Unplug the power cord from its power source before performing any maintenance on the electric bed. DO NOT unplug
the power cord from the control box. Damage to cord will result.
The control box is mounted to the head motor with a cable tie. If replacing the control box, remove the cable tie and slide
the control box away from the head motor until it is free. Disconnect all cable connections.
Before connecting/disconnecting the connections at the control box, make sure the cable lock is removed by lightly
depressing on the end tabs and lifting. After connectors are plugged in, route all cables into the cable lock slots and snap the
cable lock in place. When installing any connectors into the control box, be sure the cable lock is secure after installation -
otherwise, injury or damage may occur.
DO NOT force the connector into the control box, otherwise - injury or damage may occur.
DANGER
Possible fire hazard when used with oxygen administering equipment other than nasal or masked type.
Use masked or nasal type oxygen administering equipment only in conjunction with the manual/electric bed. The use of any
other type of oxygen administering equipment can result in a fire hazard.
When using nasal or masked type oxygen administering equipment, the oxygen or air tubing MUST be routed and secured
properly to ensure that the tubing does not become entangled and/or severed during normal operation of manual/electric
bed.
