Invacare Carroll CS, User Manual

Page: 12 / 37

Product Specifications
1-150-068-A CS Bed Manual.doc © Carroll Healthcare Inc. Page 10 of 35
ENTRAPMENT WARNING
Proper patient assessment and monitoring and proper maintenance and use of equipment are
required to reduce the risk of entrapment. Variations in bed rail dimensions, and mattress
thickness, size or density could increase the risk of entrapment. Visit the FDA website at
http://www.fda.gov to learn about the risks of entrapment. Review “A Guide to Bed Safety”,
published by the Hospital Bed Safety Workgroup, located at www.invacare.com. Use the link
located under each bed rail product entry to access this bed safety guide. Refer to the
owners manuals for beds and rails for additional product and safety information. After any
adjustments, repair or service and before use, make sure all attaching hardware is tightened
securely. Assist rails with dimensions different from the original equipment supplied or
specified by the bed manufacturer may not be interchangeable and may result in entrapment
or other injury. Mattress MUST fit bed frame and assist rails snugly to reduce the risk of
entrapment.
DO NOT drop the bed. DO NOT allow patients to fall on the bed. DO NOT jump on the bed.
Each of the preceding impacts can permanently damage either HILO motor resulting in an
inoperable bed. In the case of an inoperable bed due to a damaged HILO motor, the HILO
motor must be replaced immediately. If left unattended, a damaged HILO motor can cause the
bed to fall from the highest extended position, resulting in patient injury. DO NOT exceed the
maximum continuous duty cycle. Refer to Technical Specifications.
Operating Information
When bed is not to be used for an extended period, unplug electric bed from the wall outlet.
The electric bed is NOT designed to be used as a patient transport. When transporting a
patient, use an approved patient transport. Otherwise, injury or damage may result.
If the unit is not working properly, call a qualified technician to examine the unit and repair it.
Keep all moving parts, including the main frame, mattress deck (head and foot
springs/sections) and all drive shafts, free of obstruction (i.e. blankets/sheets, heating
blankets/pads, tubing, wiring, etc. and other types of products using electric cords which may
get tangled around the bed, side rails or legs) during operation of the manual/electric bed.
The electric bed is equipped with locking casters. When transferring into or out of the electric
bed, always lock the locking caster(s). Inspect the wheel locks for correct locking action
before actual use. Even with casters properly locked some flooring surfaces such as tile or
wood will allow the bed to move under some conditions. Use on surfaces such as these must
be evaluated by the care provider.
Check all parts for shipping damage and test before using. In case of damage, DO NOT use.
Contact a qualified technician for further instruction.
After any adjustments, repair or service and before use, make sure all attaching hardware is
tightened securely.
If a liquid is spilled in or around the electric bed, unplug the electric bed before cleaning.
Clean up the spill and allow the electric bed or the area around the electric bed to dry
thoroughly before using the electric controls again.
When operating/moving electric beds, always ensure that the individual utilizing the bed is
positioned properly within the confines of the bed. DO NOT let any extremities protrude over
the side or between the bed rails when performing these functions.