1.
Put the base
A
on a level surface and lock the rear
castors
B
.
2.
Loosen the mast knob
C
, but leave it screwed into the
base
A
.
3.
Insert the tube of the mast
D
into the hole of the base
A
.
4.
While supporting the mast assembly
D
, tighten the
mast knob
C
.
5.
Place the leg spreader handle
E
onto its support
F
and push the spring pin, to lock the handle
E
on its
support
F
.
Installing the actuator or hydraulic pump to the boom
2 x 17 mm wrench
1.
Loosen the nut
A
and remove bolt
B
from the boom
mounting bracket
C
.
2.
Place the actuator
D
or hydraulic pump
E
in the boom
mounting bracket
C
and align the holes.
3.
Reinstall the bolt
B
and tighten the nut
A
.
Wiring
(Kirilos and Atlante Electric only)
1.
Plug the hand control cable on socket
A
and motor
cable on socket
B
control unit.
2.
Place the battery
C
on the control unit. Push the top
of the battery against the mounting bracket until there
is an audible click.
4.3 Disassembling the Lift
1.
Put the base on a level surface so that all castors make
contact with the floor.
2.
Lock the rear castors.
3.
Reverse the relevant steps of the assembling procedure
for your model.
1551341-E
13