SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING
19
SECTION 4—SAFETY INSPECTION/
TROUBLESHOOTING
Safety Inspection Checklist
NOTE: Initial adjustments should be made to suit the end user's personal body structure needs
and preference. After initial setup, perform these procedures every time the wheelchair is serviced.
NOTE: Refer to the wheelchair base service manual for a complete safety inspection checklist for
the base.
❑
Inspect all fasteners.
❑
Inspect TRRO/TRBKTS fasteners and hardware.
❑
Ensure clothing guards are secure.
❑
Arms are secure but easy to release and adjustment levers engage properly.
❑
Adjustable height arms operate and lock securely.
❑
Upholstery has no rips.
❑
Armrest pad sits flush against arm tube.
❑
Clean upholstery and armrests.
❑
Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify
hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
❑
Inspect foam handgrips for damage. If damaged, have them replaced by a qualified
technician.
❑
Check that all labels are present and legible. Replace if necessary.
❑
Inspect electrical components for signs of corrosion. Replace if corroded or damaged.
Troubleshooting
NOTE: Refer to the wheelchair base service manual and electronics manual for complete
mechanical and electrical troubleshooting guides for the base and an explanation of error codes.
