SECTION 6—FRONT RIGGINGS
Adjustable ASBA Seat
24
Part No 1143238
SECTION 6—FRONT RIGGINGS
WARNING
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustments or service, ALWAYS turn the
wheelchair power off, otherwise injury or damage may result.
Installing/Removing Footrests
PH904A, PHAL4A, 70° and PW93
NOTE:
For
this
procedure,
refer
to
FIGURE 6.1.
1. Turn
the
footrest
to
the
side
(open
footplate
is
perpendicular
to
wheelchair).
2. Install
the
hinge
plates
on
the
footrest
onto
the
hinge
pins
on
the
wheelchair
frame.
3. Push
the
footrest
towards
the
inside
of
the
wheelchair
until
it
locks
into
place.
NOTE:
The
footplate
will
be
on
the
inside
of
the
wheelchair
when
locked
in
place.
FIGURE 6.1
Installing/Removing Footrests -
PH904A, PHAL4A, 70° and PW93
4. Repeat
STEPS
1
‐
3
for
other
footrest
assembly.
5. To
remove
the
footrest,
push
the
footrest
release
lever
inward,
rotate
footrest
outward.
6. Adjust
footrest
height
if
desired.
Refer
to
Adjusting
the
Footrest
Height
on
page 25.
Footrest Release
Lever
Hinge Plate
Footrest
Hinge
Pins
