SECTION 5—CENTER MOUNT FOOTRESTS
Adjustable ASBA Seat
20
Part No 1143238
Chairs built after 12/01/2008
WARNING
While the wheelchair is moving, minimum ground clearance for the front rigging is
three inches. If the wheelchair is not moving, the front rigging MUST maintain a
minimum of one inch ground clearance - otherwise personal injury and damage may
result.
NOTE:
For
this
procedure,
refer
to
FIGURE 5.3.
1. Remove
the
two
mounting
screws
that
secure
the
button
head
cleat
to
the
extension
housing.
2. Adjust
the
footrest
extension
tube
to
the
desired
height.
3. Secure
the
extension
tube
to
the
desired
height
with
the
button
head
cleat
and
mounting
screws.
Securely
tighten.
4. Repeat
STEPS
1
‐
3
for
the
other
extension
tube.
FIGURE 5.3
Adjusting the Height of the Manual Center Mount Footrest -
Chairs built after 12/01/2008
Extension
Housing
Extension Tube
Mounting Screws
Extension Tube Mounting Holes
Button Head Cleat
