WARNING!
– Before journey contact transporter and request
information about the capability for the below
required equipment.
– Make sure there is sufficient free space around
the wheelchair and user to avoid the user
making contact with other vehicle occupants,
unpadded parts of the vehicle, wheelchair
accessories or anchor points of the restraint
system.
WARNING!
– Make sure the tie-down points at the
wheelchair are not damaged.
– It’s recommended to use puncture-proof tires
during transport to avoid sability problems due
to reduced tire pressure.
WARNING!
Injury or damage may occur from wheelchair
components or accessories loosened during a
collision or sudden stop.
– Ensure all removable or detachable
components and accessories are removed from
the wheelchair and securely stored in the
vehicle.
– It is essential to have your wheelchair checked
by a specialist dealer after an accident, collision
etc.
WARNING!
Before transporting your mobility device, make
sure the motors are engaged and that the remote
is switched off.
Injury or damage may occur from battery pack
loosened during a collision or sudden stop:
– Disconnect, remove and securely store the
batteries in the vehicle.
– Insert the interface into the battery bag.
– For the above procedure, refer to paragraph
3.2 Removing the battery pack, Alber esprit
user manual.
IMPORTANT!
It is recommended that training be given on the
proper use of a restraint system product.
– Refer to the user manuals supplied with the
restraint systems.
– The following illustrations may differ depending
on the restraint system supplier.
1640502-B
49
Summary of Contents for Action 4NG series
Page 70: ...Notes...
Page 71: ...Notes...
