1.
Loosen the screw in the stop block
B
.
2.
Loosen the handwheel
A
.
3.
Adjust the headrest to the desired position.
4.
Re-tighten the handwheel
A
down to the top of the
headrest attachment.
5.
Slide the stop block
B
.
6.
Re-tighten the screw .
It is now possible to remove the headrest and
reinsert it in the desired position without further
adjustments.
Depth / angle adjustment
1.
Loosen the handle
D
.
2.
Loosen the screws
C
.
3.
Adjust the depth and angle of the headrest.
4.
Re-tighten the handle and the screws.
4.3 Headrest Junior
The height; depth and angle adjustments are
operated by the combination of the headrest scissor
brackets position.
Height; depth and angle adjustment
1.
Loosen the handle
A
.
2.
Loosen the screws
B
with 5 mm Allen key.
3.
Adjust the height; depth and angle of the headrest by
moving the scissor brackets to the desired position.
4.
Re-tighten the handle
A
and the screws
B
(5–6 Nm).
1640502-B
35
Summary of Contents for Action 4NG series
Page 70: ...Notes...
Page 71: ...Notes...
