Adjusting the height
1.
Loosen the screw
B
with 10 mm spanner in the groove
C
of the armrest tube.
2.
Move the armrest upwards or downwards until you
reach the desired height, while keeping screw
B
in
place (at the top edge of the holder).
3.
Tighten the screw
B
(5–6 Nm).
4.
Perform the setting on both sides.
3.7 Armrests
WARNING!
Risk of injury
The side rests are not locked and can be easily
pulled out upwards.
– Do not lift or transfer the wheelchair using the
side rests.
– Do not use the side rests for transportation
when carrying the wheelchair up- or downstairs.
CAUTION!
Risk of pinching
– Keep your fingers away from movable parts
during removing, fitting or adjusting the
armrest.
3.7.1 Tubular armrest, height-adjustable, swiveling
Removing
1.
Raise the tubular armrest and pull it upwards out of
the holder.
Fitting
1.
Push the tubular armrest into the holder.
Adjusting the height
1.
Pull the tubular armrest out of the holder.
2.
Loosen the screw on the tube of the armrest and screw
it back in at the desired height.
3.
Push the tubular armrest back into the holder.
4.
Perform the setting on both sides.
Swiveling
1.
Raise the armrest a little and swivel it outwards.
1608637-E
21
Summary of Contents for Action 4 NG Heavy Duty
Page 75: ...Notes...
