Adjusting the length
The posture belt has the good length, when there’s
just sufficient space for a flat hand between body
and belt.
1.
Shorten or extend the loop
D
as required.
2.
Thread loop
D
through catch
A
and plastic buckle
E
until the loop is flat.
If this adjustment is not sufficient, it might be required to
re-fit the posture belt at the fixations.
Fitting the posture belt at the fixations
CAUTION!
– Thread the belt loop through both plastic
buckles to avoid the belt from loosening.
– Do the adjustments on both sides equally,
so that the buckle clasp remains in a central
position.
– Make sure that the belts do not get caught in
the spokes of a rear wheel.
1.
Thread the loop
F
through the fixation on the chair
G
and then through BOTH plastic buckles
H
.
4.3 Headrest
The height and the removal are operated by the
handwheel. The bar is equipped with an adjustable
stop block.
Height adjustment
1608216-C
27
Summary of Contents for Action 2NG
Page 59: ...Notes...
