Invacare 6499BHD, Manual

Page: 3 / 28

3
INSTALLATION WARNINGS
Ensure that the snap buttons fully protrude through the same re-
spective adjustment hole of each leg extension. This ensures that
the leg extensions are securely locked in position and an even
height adjustment is achieved.
Make certain ALL screws, nuts and/or bolts are tight at all times.
Inspect rubber tips on the leg extensions for rips, tears, cracks or
wear or if they are missing. Replace them immediately if any of
these conditions exist.
Back tube wing nuts MUST be inspected regularly for proper tightness
- otherwise injury or damage may occur. Refer to REMOVING/IN-
STALLING THE BACK TUBE in this instruction booklet.
GENERAL WARNINGS CONTINUED
Commode seat MUST be DOWN before sitting on the commode.
The Commode has a weight limitation of 700 lbs. (317.51 kg.).
LEG HEIGHT ADJUSTMENT
(FIGURE 1)
NOTE: Refer to the GENERAL WARNINGS and INSTALLATION WARNINGS in
the SAFETY SUMMARY of this instruction booklet.
1. Depress snap button and slide leg extension up or down to desired adjust-
ment hole.
2. Ensure snap buttons are fully engaged into adjustment hole of each leg
extension and are at the same height before using.
FIGURE 1 - LEG HEIGHT ADJUSTMENT
Snap Button
Leg Extension
Leg Frame
Adjustment Hole