Intrinsyc Open-Q 835, User Manual

Page: 16 / 42

Open-Q™ 835 Development Kit based on the Snapdragon™ 835 (APQ8098) Processor User Guide Version 1.0
16
Copyright Intrinsyc Technologies Corporation
3.7.3 Hardware Specification
The Open-Q 835 Processor Board platform encompasses the following hardware features:
Table 3.7-2 Open-Q 835 Processor Board Hardware Features
Subsystem /
Connectors Feature Set Description Specification
Chipset APQ8098 Qualcomm® Snapdragon™ 835
Processor Qualcomm® Kyro CPU, quad
core, 64-bit ARM V8
compliant processor, 2.2GHz
PMIC (PM8998 &
PMi8998) Qualcomm® PMIC, Companion PMIC
for APQ8098 processor NA
Memory 4GB LPDDR4 Memory POP
Up to 1866MHz LPDDR4
POP on CPU BGA chip.
Supports via 2x32bit
channels
32 GB UFS Primary Storage for platform. Mainly
used for storing SW applications and
user data etc. Toshiba UFS on board. Can
support up to 128GB
Connectivity
Wi-Fi 2.4 GHz/ 5GHz
via
WCN3990
– Analog IQ,
WSI
2.0
WCN3990
Wi-Fi + BT +FM Combo Chip 802.11a/b/g/n/ac 2.4/5.0
GHz via WCN3990 over
analog IQ, WSI 2.0,
Full 2x2 antenna
configuration
BT 2.4 GHz via
WCN3990
– UART
/
SLIMbus
WCN3990
Wi-Fi
+
BT +FM Combo Chip
Support BT 5.0 + HS and
backward compatible with BT
1.x, 2.x + EDR
GNSS
via WTR5975 –
Qlink Qualcomm
Proprietary Protocol
GNSS Frontend
GPS/ GLONASS/
COMPASS/Galilei
RF Interfaces 2xWLAN / BT Connect to antenna on carrier board
via coax cable 2.4 / 5 GHz
1x GNSS Connect to antenna on carrier board
via coax cable
GPS/ GLONASS/
COMPASS
/Galilei
Audio
1 x
Headset Output Headset/ headphone output
Analog differential output
2 x
Loud-speaker
2 x
loud-speaker output
Digital output
1 x
Earpiece output Earpiece output
Analog differential output
3 x analog MICs
Analog MIC input
Analog differential input
3 x
digital MICs Digital MIC input
Digital input
Camera 3 x MIPI CSI Camera Connectors CSI0, CSI1, CSI2 MIPI
Alliance Specification
v1.2
Display
1
x
MIPI DSI (DSI0 &
DSI1)
+ Touch 100-pin display
Connector
100- pin display connector.
MIPI Alliance Specification
v1.2. MIPI D-PHY
Specification v0.65, v0.81,
v0.90, v1.01, v1.2
USB 1 x USB HS
1 x USB SS 1 x Type-C USB 3.1
USB3.1
PCIe 1 X PCIe PCIe 0 PCIe signal to Wigig module.
Reserve option for PCIe SLOT1 and
MiniPCIe(hardware rework is needed)
PCI Express Specification,
Rev 2.1
Connectors
2 x 240pin BB Card Connector for BB Card
2
x 240 pin B2B connector