Open-Q™ 835 Development Kit based on the Snapdragon™ 835 (APQ8098) Processor User Guide Version 1.0
38
Copyright Intrinsyc Technologies Corporation
3.8.20.1 LCD display panel
The LCD panel comes preinstalled on the Intrinsyc AMOLED display adaptor board. Below
are the Panel specifications:
•
Resolution:
1440x2560
•
LCD Type:
AMOLED
•
PCAP touch panel
•
No of Lanes:
2 x 4 lane MIPI DSI interface via Display Board.
•
Diagonal Length
: 5.5”
Note:
The display above when mounted on the Intrinsyc Open-Q 835 Display Adapter is meant to work
with the carrier board. Altering the use of this LCD panel is not recommended.
3.8.21 Camera Connectors
The Open-Q 835 development kit supports three 4-lane MIPI CSI camera interfaces via
three separate JAE 41-pin connectors.
The following are some features of the camera connectors:
•
3 x 4 lane MIPI CSI signals
•
Reserved J1702 for integrated flash driver
•
Support for 3D camera configuration
o
Separate I2C control (CCI0, CCI1)
•
Supports all CSI interfaces
•
All camera CSI connectors are on the carrier board edge
•
Self-regulated camera modules can be powered with 3.3V power (MB_VREG_3P3)
•
Uses JAE FI-RE41S-VF connector for exposing MIPI, CLK, GPIOs and Power rails.
•
Please use JAE FI-RE41S-HF to mate with the camera connectors on the carrier
board
•
The Intrinsyc camera adapter card is designed to be used with the carrier board.
Please contact
[email protected] for availability
Figure 25 Camera Connectors (J1701, J1801, J1901)
