EN-V233 – 5005 – AA Installation and use of built-in Visio call panel EEN-PIVIV3GB
Page 7 / 12
EQUIPMENT CONFIGURATION
A)
G
ENERAL POINTS
INTRATONE call panels are mainly configured on the
www.intratone.com website in
the "management website" tab
.
Nevertheless, some settings can be changed on-site:
- Configuration of the push button.
- Configuration of the door-opening time.
- Panel sound volume
B)
C
ONFIGURATION WITH A
T
ENANTIAL CENTRAL UNIT
,
EEN-CEN12
(See central unit guide EEN-CEN12 V233-5001-XX)
With regard to the push button and of the door-opening time, see the "Door settings"
menu on the central unit.
With regard to the volume level, you have 2 options in the "Panel volume" menu:
- "Direct selection of volume":
Enter a value between 1 and 4 corresponding to the sound level.
- "Settings on the Panels":
This menu starts a 15-minute timer. During this time, you can move between the call
panel or panels connected to this central unit in order to adjust the sound level.
Step 1:
Type in the keypad
code: "
12345678
"
Step 2:
The call panel automatically
starts
« sound level adjustment"
which continues repeatedly.
step 3 :
Validate
the chosen level
by pressing the
call button
֠
֠
֠
֠
on the call panel
This procedure is valid for 15 minutes per the timer. To exit from this procedure, wait until the
timer finishes or exit from the "Settings on the panels" menu.
Sound level
adjustment
