www.inline-info.com
12
13
17. VIDEO WALL BASIC SETUP
Note that all the settings here are only available on receivers, it‘s invalid if applying to any transmitter.
18. VIDEO WALL ADVANCED SETUP
0
1
2
3
Item
Option
Description
Bezel and Gap com-
pensation
OW
Adjust the width of outline.
OH
Adjust the height of outline.
VW
Adjust the width of visible.
VH
Adjust the height of visible.
Wall Size and Position
Layout
Vertical Monitor Count
Set the number of vertical monitors up to 8.
Horizontal Monitor Count
Set the number of horizontal monitors up to 16.
Row Position
Specify the row position of monitor. The row order from top
to bottom is 0-7. The count number of row position is from 0.
Column Position
Specify the column position of monitor. The row order from
left to right is 0-15. The count number of column position is
from 0.
Preference
Stretch Type
Select a preferred display type.
Clockwise Rotate
Rotate the video if necessary.
Apply to this device
connected by your
browser
• Select the unit of client (receiver) to apply the settings you have changed.
• Tick to enable or untick to disable the on screen display function.
Show OSD (OSD
anzeigen)
Tick to display each receiver’s number on all connected monitors.
The advanced setup page is focused on the settings of
unique video wall application (refer to the right illustration)
User can design an asymmetric video wall according to
their requirement. Note that all the settings here are only
available on receivers, it‘s invalid if applying to any trans-
mitter.
1.
Before starting the setting on the Advanced Setup
tab, make sure the video wall layout has been set on
the Basic Setup tab, otherwise, all the options will
unable to select.
2.
Click to select the desired unit you wish to configure,
or click to select all units. Once the desired unit
has been selected and clicked, the button will chan-
ge to green from blue.