www.inline-info.com
6
7
8. POINT-TO-POINT
Point-to-point is a basic structure of this extender. You can extend the signal via connecting the transmitter to the receiver
using a CATx cable directly.
A. POINT-TO-POINT CONNECTION DIAGRAM
B. OPERATION
Operation
1.
Adjust the DIP switches of transmitter and receivers to the same positions.
2.
Power the transmitter, receivers and all the connected devices to on.
3.
Press the
CONNECT
button on the front panel of receiver unit once the DIP switch has been adjusted.
4.
Press the
MODE
button on the front panel of transmitter to switch the image quality in streaming. Two different modes
of streaming are provided, graphic and video more respectively. You may select an appropriate viewing mode depending
on the bandwidth of connected network.
Graphic mode:
Delivers the streaming video in best quality.
Video mode:
Adjusts the streaming video quality automatically, it is based on your current bandwidth.
B. MULTIPLE TX TO SINGLE RX CONNECTION
Except the feature of video wall, you also can select one source to display from multiple transmitters.
Note that the diagram illustrated here is an example, the actual application may vary. All illustrated computer, accessories
and monitors are not included in the package, it is for reference only. Make sure all the devices and peripherals are connec-
ted appropriately before using this unit.
Note that the diagram illustrated here is an example, the actual application may vary. All illustrated computer, accessories
and monitors are not included in the package, it is for reference only. Make sure all the devices and peripherals are connec-
ted appropriately before using this unit.
HDMI 4K UHD TV
Receiver rear
Receiver front
Transmier rear
Transmitter front
HDMI
Monitor
PC or Media player
Power
adapter
Power
adapter
USB flash or external hard disk drive
1.
Adjust the DIP switches of transmitter and receiver to the same positions.
2.
Power the transmitter, receiver and all the connected devices to on.
3.
Press the
CONNECT
button on the front panel of receiver unit once the DIP switch has been adjusted.
4.
Press the
MODE
button on the front panel of transmitter to switch the image quality in streaming. Two different modes
of streaming are provided, graphic and video more respectively. You may select an appropriate viewing mode depending
on the bandwidth of connected network.
Graphic mode:
Delivers the streaming video in best quality.
Video mode:
Adjusts the streaming video quality automatically, it is based on your current Internet bandwidth.
9. MULTIPLE CONNECTION
Based on the various usage of the extender, you may select to connect a transmitter to multiple receivers and vice versa.
Make sure a Giga Ethernet Switch is available if the extender structure is forward to multiple connection.
A.SINGLE TX TO MULTIPLE RX CONNECTION
The function of distributing one source to several screens is available. By this feature, you can assemble the extender as a
video wall. You only need a transmitter and up to 128 receivers for 8x16 video wall.
Note that the diagram illustrated here is an example, the actual application may vary. All illustrated computer, accessories
and monitors are not included in the package, it is for reference only. Make sure all the devices and peripherals are connec-
ted appropriately before using this unit.
Video wall
PC
Gigabit Ethernet switch
Transmitter front
Transmitter rear
Receiver 4 front
Receiver 1 front
Receiver 2 front
Receiver 3 front
PC
Gigabit Ethernet switch
Transmitter 1 front
Transmitter 1 rear
Transmitter 2 front
Transmitter 2 rear
Media player
HDMI 4K UHD TV
Receiver front