96048 1 06/20
Translation of the Original Operation Manual
Übersetzung der Originalbetriebsanleitung
GB
12
2 Startup
2 .1 Area of application
CAUTION!
Damage to the cutting mechanism!
Only use the machine to shred approved
materials!
Shredding other types of material can result
in damage to the equipment (e.g. destruc-
tion of the cutting mechanism, etc.).
The
intimus 85 OmniShred / intimus 155 OmniShred
shredder is a machine to shred
• Paper, cardboard, crumpled paper
• Laminated paper, acetate sheets, microfilms
• Medical images (polyester) e.g. radiography
• Medical plastic containers such as pillbottles and
syringes, sample bottles
• ID documents like passports
• CDs/DVDs, security cards and credit cards
• Key fob chips
The machine uses one cutting mechanism for all cut-
ting material. Please use the suitable slot:
Top feed slot (Fig. 1/1): Use for shredding clinical com-
ponents, CDs/DVDs and plastic cards.
Front feed slot (Fig. 1/2): Use for shredding paper, card-
board and acetate sheets. The machine also shreds pa-
per clips and staples.
1
2
1
Top feed slot
2
Front feed slot
Fig. 1 intimus 85/115 OmniShred: two feed slots
2 .2 Installation
1 .
Unpack and install the device.
2 .
Insert the plastic bag into the catch basket (Fig. 8/2).
3 .
Connect the device to the power supply via the
power plug (for information on the fuses which the
power socket requires, see
„Technical Data“, p. 18
.
2 .3 Installation of the oil container
For shredders with integrated automatic oiler, the sup-
plied oil container must first be positioned before each
use in the casing, and the oil hose of the oiler connect-
ed to the container.
To do this, proceed as follows:
1 .
Open door of the casing (Fig. 2/1). Remove catch
basket.
2 .
Pull the oil hose forward a little (Fig. 2/2).
Dummy Plug
1
000422
2
1
Casing door
2
Oil hose
Fig. 2 Remove Dummy-Plug
3 .
If the oil container is mounted for the first time
please remove the dummy plug (screw, Fig. 2) from
the transparent hose.
4 .
Feed the oil hose (Fig. 3/2) into the oil container
(Fig. 3/3) until it reaches the bottom of the contai-
ner
5 .
Close the container with the screw cap (Fig. 3/1)
that is connected to the oil hose.
1
2
3
000423
1
Screw cap
2
Oil hose
3
Oil container
Fig. 3 Close the oil container with the cap
6 .
Place the oil container in the left rear corner of the
