128
GS
SAVE THESE INSTRUCTIONS
Page 9
(128GS) MODEL SF20220R SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 10/28/2011
English
4.
In a clockwise motion screw filter housing nut
(17)
onto the motor water inlet
(See drawings 3.1 & 3.2)
.
5.
Replace the basket
(16)
and leaf trap cover
(14)
back to the pre-filter housing
(See drawings 4.1 & 4.2)
.
SETUP INSTRUCTIONS (continued)
SS
EE
TT
UU
PP
II
NN
SS
TT
RR
UU
CC
TT
IIOO
NN
SS
Sand tank installation:
1.
Place the tank support base at the selected location.
2.
Place the tank on the tank support base
(See drawing 5.1).
3.
Connect the motor pre-filtering assembly unit to the tank support base
(See
drawing 5.2)
. NOTE: Ensure the pre-filter housing water inlet hose connection
is facing towards the pond.
IMPORTANT: Some countries, especially in the European community,
require the product to be secured to the ground or to a base in a
permanent upright position. Check your local authorities to determine if
there is a regulation in your area regarding pond filter-pumps. If yes, then
the product can be mounted to a platform using the two holes located in
the base. See drawing 5.3.
The product can be mounted on a cement base or onto a wooden
platform to prevent accidental falling over.
•
The mounting holes are 6.4 mm in diameter and spaced 177.4 mm
apart.
•
Use two bolts and lock nuts with a maximum of 6.4 mm in diameter.
3.2
3.1
4.1
4.2
5.1
5.2
m
m
1
7
7
.4
5.3
17
17
14
16
35
