(17PO) AP619D/AP619DP-22 ELECTRIC PUMP ENGLISH 4.875” X 7.25” 12/04/2021
English
17PO
READ AND SAVE THESE INSTRUCTIONS
Page 2
NOTE:
Drawings for illustration purpose only. May not reflect actual product. Not to scale.
Due to a policy of continuous product improvement, Intex reserves the right to change
specifications and appearance, which may result in updates to the instruction manual,
without notice.
PARTS REFERENCE
OPERATINg INSTRUCTIONS
general
• This appliance has a polarized plug (one blade is wider than the other). This plug will fit
in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not
change the plug in any way.
• Airbeds are designed for temporary use and are NOT designed to be a replacement for a
traditional mattress.
• Make sure the area is flat, level, clean and free from sharp objects, and within reach of
an electrical outlet.
• To prevent puncture or damage to the airbed, never drag the airbed across the floor. Lift
the inflated airbed when moving or changing location.
Maintenance instructions:
• No air pump maintenance is required. Pump is removable.
• For cleaning use only clean cloth with mild soapy solution. Do not use any chemicals.
• In case of repairs, use only common PVC repair glue and patches. For flocked surfaces: rub
away the flocking material with an eraser first before applying the glue and/or patch.
SERVICINg OF A DOUBlE-INSUlATED PRODUCT:
In a double-insulated product, two systems of insulation are provided instead of grounding.
No grounding means is provided on a double-insulated product, nor should a means for
grounding be added to the product. Servicing of a double-insulated product requires extreme
care and knowledge of the system, and should be done only by qualified service personnel.
Replacement parts for a double-insulated product must be identical to those parts in the
product. A double-insulated product is marked with the words “DOUBLE INSULATION” or
“DOUBLE INSULATED” and with the symbol .
Part Descriptions:
1. Pump holder frame
2. Pump removal tab
3. Cord compartment
4. AC
power cord
5. Manual inflation port cap
6. Manual inflation port
7. Cord compartment cover
8. Air passage
9.
C
ontrol dial
10. Airbed front
11. Closed /
Pump Off Position
2
34
5
6
7
1
8
10
9
11
