background image

250

PO

S  AVE THESE INSTRUCTIONS

(250PO)  SPA (JET + HARD WATER)  ENGLISH  7.5” X 10.3”  PANTONE 295U  01/10/2014

English

Page 5

WARNING

j)  Exit immediately if uncomfortable, dizzy, or sleepy. Spa heat can cause hyperthermia and unconsciousness.  
  The use of alcohol, drugs, or medication can greatly increase the risk of fatal hyperthermia. The causes,   
  symptoms, and effects of hyperthermia may be described as follows:
  Hyperthermia occurs when the internal temperature of the body reaches a level several degrees above the  
  normal body temperature of 98.6°F (37°C). The symptoms of hyperthermia include an increase in the 
  internal temperature of the body, dizziness, lethargy, drowsiness, and fainting. The effects of hyperthermia
  include failure to perceive heat; failure to recognize the need to exit spa or hot tub; unawareness of 
  impending hazard; fetal damage in pregnant women; physical inability to exit the spa or hot tub; and 
  unconsciousness resulting in the danger of drowning.
•  THE USE OF ALCOHOL OR DRUGS CAN GREATLY INCREASE THE RISK OF FATAL HYPERTHERMIA
  IN HOT TUBS AND SPAS.
•  Always add chemicals to water, never add water to chemicals. Adding water to chemicals may cause  

 

  strong fumes or violent reactions and hazardous chemical spray.
•  Never jump or dive into a spa or any shallow body of water.
•  Assembly and disassembly by adults only.
•  Always unplug this product from the electrical outlet before removing, cleaning, servicing or making any    
  adjustment to the product.
•  The plug must be accessible after product is installed.
•  Do not bury the electrical cord. Locate the cord where it will not be damaged by lawn mowers, hedge  

 

  trimmers and other equipment.
•  If the supply cord is damaged, it must be replaced by a qualifi ed electrician in order to avoid a hazard. Use  
  only identical replacement parts when servicing.
•  To reduce the risk of electric shock, do not use extension cords, timers, plug adaptors or converter plugs to  
  connect unit to electrical supply; provide a properly located outlet.
•  Do not attempt to plug in or unplug this product while standing in water or when your hands are wet.
•  Do not leave the spa empty for extended period of time. Do not expose the spa under direct sunshine.
•  Adequate drainage system must be provided around the spa to deal with overfl ow water.
•  Do not allow the water in the spa to freeze. Do not turn on the spa when the water is frozen.
•  Do not use the spa if damaged in delivery and/or malfunctioning in any fashion. Contact the Intex service  
  center for further direction.
•  Never pour water with a temperature higher than 104°F (40°C) into the spa directly.
•  Keep all pets away from spa to avoid any damage.
•  Do not add bath oil or bath salt to the spa water.

CAUTION

•  Maintain water chemistry in accordance with manufacturer’s instructions.

•  This product is provided with a GFCI/RCD located at the end of the power cord. The GFCI/RCD must be  
  tested before each use. Do not use the spa if the GFCI/RCD does not function properly. Disconnect the
  power cord until the fault has been identifi ed and corrected. Contact a qualifi ed electrician to correct the   
  fault. Do not bypass the GFCI/RCD. There are no serviceable parts inside the GFCI/RCD. Opening the    
  GFCI/RCD will void the warranty.

1.

  Plug the power cord into a grounded electrical socket.

2.

 Press the 

RESET

 button on the GFCI/RCD

.

 

3.

  Turn on the spa electrical equipment.

4.

 Press the 

TEST

 button on the GFCI/RCD

The GFCI/RCD indicator 

  should turn off and the electrical equipment should shut off. If the 
  GFCI/RCD indicator does not turn off, and the electrical equipment 
  does not shut off, the GFCI/RCD is faulty. Do not use the spa. 
  Contact a qualifi ed electrician to correct the fault.

5.

 Press the 

RESET

 button on the GFCI/RCD. The indicator on 

  the GFCI/RCD should turn on. If the GFCI/RCD indicator does 
  not turn on, the GFCI/RCD is faulty. Do not use the spa. 
  Contact a qualifi ed electrician immediately to correct the fault.

WARNING

 

 

TEST

RESET

RESET

TEST

TEST

RESET

RESET

TEST

TEST

Summary of Contents for PureSpa SPJ-H-10



















Reviews: