background image

193

PO

SAVE THESE INSTRUCTIONS

(193PO)  MODEL SF90110T SAND FILTER PUMP  ENGLISH  7.5” X 10.3”  PANTONE 295U  06/21/2013

English

Page 3

IMPORTANT SAFETY RULES

Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product.

READ AND FOLLOW ALL INSTRUCTIONS

WARNING

 

To reduce the risk of injury, do not permit children to use this product. Always supervise children 

  and those with disabilities.

 

Children must stay away from this product and electrical cord(s).

 

Assembly and disassembly by adults only.

 

Risk of electric shock. Connect only to a grounding type receptacle, this product is provided with 

  a ground-fault circuit interrupter. If replacement of the plug or cord is needed, use only identical 

  replacement parts.

 

Always unplug this product from the electrical outlet before removing, cleaning, servicing or 

  making any adjustment to the product.

• The unit is provided with a ground-fault circuit interrupter (GFCI). To test the GFCI, push the test 

 button. T

he GFCI should interrupt power. 

Push the reset button, power should be restored. If the 

  GFCI fails to operate in this manner. 

T

he GFCI is defective. If the GFCI interrupts power to the 

  pump without the test button being pushed, a ground current is flowing, indicating the possibility 

  of an electric shock. Do not use this pump. Disconnect the pump and have the problem corrected 

  by a qualified service representative before using.

 

Do not bury the electrical cord. Locate the cord where it will not be damaged by lawn mowers, 

  hedge trimmers and other equipment.

 

To reduce the risk of electric shock, replace damaged cord immediately. Use a qualified 

  electrician to replace the cord.

 

To reduce the risk of electric shock, do not use extension cords, timers, plug adaptors or 

  converter plugs to connect unit to electric supply; provide a properly located outlet.

 

Do not attempt to plug in or unplug this product while standing in water or when your hands are 

 wet.

 

Do not use an appliance leakage current interrupter (ALCI) in place of a GFCI since the ALCI will 

   protect people.

• Position this product away from pool, so as to prevent children from climbing on it and access the 

 pool.

 

Do not operate this product when pool is occupied.

 

To reduce the risk of entrapment hazard, never enter the pool if suction strainer component is 

  loose, broken, cracked, damaged or missing. Replace loose, broken, damaged, cracked or 

  missing suction strainer components immediately.

• Never play or swim near suction fittings. Your body or hair may be trapped causing permanent 

  injury or drowning.

• To prevent equipment damage and risk of injury, always turn pump off before changing the filter 

  control valve position.

• Never operate this product above the maximum working pressure stated on the filter tank.

• Hazardous Pressure. Improper tank valve cover assembly could cause the valve cover to blow 

  off and cause serious injury, property damage or death.

• This product is intended to be used only for the purposes described in the manual!

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN PROPERTY 

DAMAGE, ELECTRIC SHOCK, ENTANGLEMENT OR OTHER SERIOUS 

INJURY OR DEATH.

This product is for use with storable pools only. Do not use with permanently-installed pools. A storable pool 

is constructed so that it is capable of being readily disassembled for storage and reassembled to its original 

integrity. A permanently-installed pool is constructed in or on the ground or in a building such that it cannot 

be readily disassembled for storage.

These product warnings, instructions and safety rules provided with the product represent some common 

risks of water recreation devices and do not cover all instances of risk and danger. Please use common 

sense and good judgement when enjoying any water activity.

CAUTION

Summary of Contents for krystal clear SF90220RC
























Reviews: