![background image](http://html.mh-extra.com/html/intex/happy-crab-easy-set-pool/happy-crab-easy-set-pool_owners-manual_2081305016.webp)
81PO
English
(81PO) HAPPY CRAB EASY SET POOL ENGLISH 4.875” X 7.25” 07/13/2020
S AVE THESE INSTRUCTIONS
Page 16
TROUBLESHOOTING
PROBLEM
DESCRIPTION
CAUSE
SOLUTION
ALGAE
•
Greenish water.
•
Green or black
spots on pool liner.
•
Pool liner is slippery
and/or has a bad
odor.
•
Chlorine and pH
level need
adjustment.
• Super chlorinate
with shock
treatment. Correct
pH to your pool
store’s
recommended level.
• Vacuum pool bottom.
• Maintain proper
chlorine level.
COLORED
WATER
• Water turns blue,
brown, or black when
first treated with
chlorine.
•
Copper, iron or
manganese in water
being oxidized by
the added chlorine.
• Adjust pH to
recommended level.
• Run filter until water
is clear.
• Replace cartridge
frequently.
FLOATING
MATTER IN
WATER
• Water is cloudy or
milky.
• “Hard water” caused
by a too high pH
level.
•
Chlorine content is
low.
• Foreign matter in
water.
• Correct the pH level.
Check with your pool
dealer for advice.
• Check for proper
chlorine level.
• Clean or replace your
filter cartridge.
CHRONIC LOW
WATER LEVEL
• Level is lower than
on previous day.
• Rip or hole in pool
liner or hoses.
• Repair with patch kit.
• Finger tighten all
caps.
• Replace the hoses.
SEDIMENT ON
POOL BOTTOM
• Dirt or sand on pool
floor.
• Heavy use, getting in
and out of pool.
• Use Intex pool
vacuum to clean
bottom of pool.
SURFACE
DEBRIS
• Leaves, insects etc. • Pool too close to
trees.
• Use Intex pool
skimmer.
PROBLEM
CAUSE
SOLUTION
POOL INLET AIR
ADAPTOR
LEAKING
• Hose clamps are not well-fitted.
• Tighten or reinstall hose clamps.
AIR JET VALVE
LEAKING
• Air jet valve is not tight and
facing up.
• Air jet valve internal seal blocked.
• Air jet valve internal seal dirty.
• Air jet valve broken.
• Tighten air jet valve and make
sure it’s facing up.
• Turn ON or plug in the pump and
run for few seconds, then turn
OFF or unplug, repeat 3 times.
• Remove air jet valve, flush dirt
out with water and replace valve
back.
• Replace a new air jet valve.