(337PO) FLOATING POOL SPEAKER WITH LED LIGHT ENGLISH SIZE: 4.875” X 7.25” 07/29/2017
337
PO
SAVE THESE INSTRUCTIONS
Page
5
Troubleshooting guide:
Q.
What should I do if the product does not light up?
A.
1. Check the
battery housing
to ensure 3
AA
batteries are installed correctly
with regard to polarity (+ and -).
2.
Check that the battery housing is snug (hand tightened).
3. Replace the batteries.
Q.
What should I do if the light emitted by this product is too weak?
A.
1.
Clean outside surface of the shade using mild soapy solution.
2. Replace all batteries with 3 new
AA
batteries.
Q.
What should I do if the device is flashing red light?
A.
Replace the batteries.
Q.
What should I do if the speaker sound is blurry, not as loud and clear as
before?
A.
1.
Make sure the speaker mesh surface is clean and dry, use a dry cloth to
wipe out any water.
2.
Check and adjust the volume and sound settings on your Bluetooth device.
Q.
Why my Bluetooth device no longer connects to the speaker automatically after
the speaker is turn on?
A.
Activate the Bluetooth on your device. Make sure the speaker (FLS625)
information is stored in your Bluetooth device, if deleted repeat the “
Pairing
and connecting with a Bluetooth device
” steps.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CAN ICES-005 (B)/NMB-005 (B)
