background image

 
 
 
 
 

IMPORTANT SAFETY RULES

 

Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product. 

 
 

English 

READ AND FOLLOW ALL INSTRUCTIONS

 

WARNING

 

• To reduce the risk of injury, do not permit children to use this product. Always   

supervise children and those with disabilities. 

• Children must stay away from this product and electrical cord(s). 
• Assembly and disassembly by adults only. 
• Risk of electric shock. Connect only to a grounding type receptacle, this product 

is provided with a ground-fault circuit interrupter. If replacement of the plug or cord   
is needed, use only identical replacement parts. 

• Always unplug this product from the electrical outlet before removing, cleaning,   

servicing or making any adjustment to the product. 

• The unit is provided with a ground-fault circuit interrupter (GFCI). To test the GFCI, 

push the test button. The GFCI should interrupt power. Push the reset button, power 

should be restored. If the GFCI fails to operate in this manner, the GFCI is   
defective. If the GFCI interrupts power to the pump without the test button being   
pushed, a ground current is flowing, indicating the possibility of an electric shock.   
Do not use this pump. Disconnect the pump and have the problem corrected by a   
qualified service representative before using. 

• Do not bury the electrical cord. Locate the cord where it will not be damaged by   

lawn mowers, hedge trimmers and other equipment. 

• To reduce the risk of electric shock, replace damaged cord immediately. Use a   

qualified electrician to replace the cord. 

• To reduce the risk of electric shock, do not use extension cords, timers, plug   

adaptors or converter plugs to connect unit to electric supply; provide a properly   
located outlet. 

• Do not attempt to plug in or unplug this product while standing in water or when   

your hands are wet. 

• Do not use an appliance leakage current interrupter (ALCI) in place of a GFCI since 

the ALCI will not protect people. 

• Position this product away from pool, so as to prevent children from climbing on it   

and access the pool. 

• Do not operate this product when pool is occupied. 
• To reduce the risk of entrapment hazard, never enter the pool if suction strainer   

component is loose, broken, cracked, damaged or missing. Replace loose, broken,   
damaged, cracked or missing suction strainer components immediately. 

• Never play or swim near suction fittings. Your body or hair may be trapped causing   

permanent injury or drowning. 

• To prevent equipment damage and risk of injury, always turn pump off before   

changing the filter control valve position. 

• Never operate this product above the maximum working pressure stated on the 

filter tank. 

• Hazardous Pressure. Improper tank valve cover assembly could cause the valve   

cover to blow off and cause serious injury, property damage or death. 

• This product is intended to be used only for the purposes described in the manual! 

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN

 

PROPERTY DAMAGE, ELECTRIC SHOCK, ENTANGLEMENT OR

 

OTHER SERIOUS INJURY OR DEATH.

 

CAUTION

 

This product is for use with storable pools only. Do not use with permanently-installed pools. A

 

storable pool is constructed so that it is capable of being readily disassembled for storage and

 

reassembled to its original integrity. A permanently-installed pool is constructed in or on the

 

ground or in a building such that it cannot be readily disassembled for storage.

 

These product warnings, instructions and safety rules provided with the product represent 
some common risks of water recreation devices and do not cover all instances of risk and   
danger. Please use common sense and good judgment when enjoying any water activity. 
Follow all aspects of the local and National Electrical Code(s) when installing Krystal Clear 
Sand Filter Pump and Saltwater System Model CS20110. 

SAVE THESE INSTRUCTIONS

 

Summary of Contents for CS20110













































Reviews: