IntesisBox IBOX-BAC-MBTCP-100, User Manual

Page: 22 / 27

IntesisBox
®
BACnet/IP Server - Modbus TCP Master
User’s Manual r1 eng
© Intesis Software S.L. - All rights reserved
This information is subject to change without notice
IntesisBox
®
is a registered trademark of Intesis Software SL
URL
Email
tel http://www.intesis.com
info@intesis.com
+34 938047134
22 / 27
Active
Description Indicates if the signal is active or not for the integration
Values  0: Not active
 1: Active
Edit mode Text edit or AutoEnumeration
0 / 1 based register
Description Some Modbus TCP devices use 0-based register addresses (also referred as
Jbus), while others use 1-based register addresses (also referred as Modbus
TCP), in the Modbus TCP communication (for 1-based devices, the register
address 100 is specified as 99 in the Modbus TCP communication frames).
Select
0-Based if your Modbus TCP devices use 0-based address map (like
PLCs), or select 1-Based if your Modbus TCP devices use 1-based address
map.

Description Buttons to move the selected row (or rows) up or down inside the grid. To
move up or down inside the grid a single row or a group of consecutive
rows, just select the row or rows using the left button of the mouse and
push the desired up or down button.
Comments This can be done also using the key combinations ALT+arrow up or
ALT+arrow down instead of up or down buttons
Add
Description Button that adds a row under the selected one.
Delete
Description Buttons to delete the selected row (or rows).
Save
Description Save the configuration (details in section 5.1.4)
Exit
Description Exits the configuration window (details in section 5.1.4)