24
Climate control (1Byte)
This kind of device corresponds to the climate mode:
The group directions to configure are:
-
Select KNX mode 1Byte:
temperature mode selection (comfort, standby,
night and protection against extremes).
-
Controller block 1bit:
thermostat’s controller blocking. Leave it blank
does not limit any functionality.
-
Controller status 1Byte:
1byte thermostat status communication object.
For the correct functioning of the device, it is important to check that the controller
status 1Byte reading flag has been enabled in ETS.
Summary of Contents for Houseinhand
Page 1: ...Configuration manual v2 5...
