Connect the 24volt wires from the Central Vacuum to the VacPort.
Leave slack in the wires at the connections.
Please Note: The connection to the VacPort should be flexible enough so that you can
pull the FLEXIBLE HOSE and central vacuums Low Voltage Wires out of the wall
and connect both to the VacPort outside the wall.
You have 3 option to connect to the VacPort:
1) with PVC cement glue the elbow to the pipe coupling and then to the VacPort, the other
end of the elbow connects to a black threaded pipe coupling. Do not glue this coupling,
just twist and press fit into elbow, check if you still can slide the VacPort with the
flex-hose attached in or out of the cut-out.
2) with pipe coupling, push black threaded coupling directly into pipe coupling.
3) with the flexible hose, you can either connect the flexible hose directly with a hose
clamp to the VacPort’s pipe or connect with the black threaded coupling to the pipe
coupling (2)
,
1) elbow
with pipe
coupling
2) pipe
coupling
3) flex-hose
with threaded
coupling into
pipe coupling
Or hose
Model A900
with LED
3
top view of VacPort
Connecting the VacPort to your Central Vacuum
LED
Circuit Board
24 Volt
Pigtail Wire
