InterVac A900 Installation And Operating Manual Download Page 1

By

RECORD THIS INFORMATION FOR
FUTURE REFERENCES

MODEL NUMBER _______________________

DATE OF PURCHASE ___________________

PLACE OF PURCHASE__________________

Manual # M010

Date: 01-2015

INSTALLATION AND OPERATING MANUAL

MODEL A900 with LED

MODEL A910 without LED

IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR

INTERVAC PRODUCT,

PLEASE CALL OUR CUSTOMER SERVICE DEPT. AT: 1-888-499-1925

DO NOT RETURN THIS PRODUCT TO THE STORE OR DEALER

This unit should be installed by a qualified technician.

InterVac Design Corp.

Phone 772-463-1400 • USA & Canada toll free 888-499-1925

www.

.com •

2939 SW 42nd Avenue, Palm City, FL 34990

intervacdesign

e-mail: [email protected]

Summary of Contents for A900

Page 1: ...MODEL A910 without LED IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR INTERVAC PRODUCT PLEASE CALL OUR CUSTOMER SERVICE DEPT AT 1 888 499 1925 DO NOT RETURN THIS PRODUCT TO THE STORE OR DEALER This unit should be installed by a qualified technician InterVac Design Corp Phone 772 463 1400 USA Canada toll free 888 499 1925 www com 2939 SW 42nd Avenue Palm City FL 34990 intervacde...

Page 2: ...ATE INSTALLED 1 Your VacPort is supplied with a Trim Plate in case you need more height to reach into the cut out It is also used as a template to mark the cut out See STEP1 The opening is 6 1 8 wide x 2 1 2 2 After cutting the hole STEP2 attach the Trim Plate with the 2 pan head screws in one of the outer holes on each side see STEP3 4 If you do not need the Trim Plate attach the VacPort directly...

Page 3: ... a black threaded pipe coupling Do not glue this coupling just twist and press fit into elbow check if you still can slide the VacPort with the flex hose attached in or out of the cut out 2 with pipe coupling push black threaded coupling directly into pipe coupling 3 with the flexible hose you can either connect the flexible hose directly with a hose clamp to the VacPort s pipe or connect with the...

Page 4: ...hreaded coupling 3 into the pipe coupling 5 4 Connect the LOW voltage wire under screw heads NOT under Big Washer The door is held open by 2 small magnets Screw hole to attach VacPort to wall VacPort Model A910 Without LEDs Wall Opening location Pin 1 Remove old dust pan from the wall 2 Use the same 2 screws and attach Trim Plate use the holes A from the removed VacPan use the holes B from the rem...

Reviews: