Interton APPRAISE 2, User Manual, Page: 6 / 27

Basic Restaurant
10 11
Getting Started
Charging the Battery
Before using your Remote Control 2, you
need to fully charge the rechargeable
battery. To charge it, plug in the charging
cable as shown below. Then plug the other
end into a power outlet. During charging
the bars in the battery meter will be show-
ing one, two and three bars continuously.
When fully charged all three bars will be
shown continuously.
Turning your Remote Control 2 ON and OFF
To turn your Remote Control 2 ON slide the ON/ OFF switch (1 on
page 8) down to the ON position. A white ”I” icon will be visible
on the base of the switch and the display will turn on.
To turn your Remote Control OFF, slide the ON/OFF switch up to
the OFF position.
Program 1 ‘Basic’ Program 2 ‘Restaurant’
Changing program
The “P” button (10 on page 9) is used to switch between the
programs that your hearing care professional has programmed
into your hearing instruments. The name of the program dis-
played can be configured by your hearing care professional.
Each time you press the “P” button the program advances one
step, returning back to program 1 at the end of each cycle (e.g. 1,
2, 3, 1). Each change in program is accompanied by beep tones
in both hearing instruments, if not disabled by your hearing
care professional during the fitting, and the program currently
in use is shown in the display. For optimal performance it is rec-
ommended that both instruments be set to the same program.
Do not charge the Remote Control 2 while it is
on your body.