Interton APPRAISE 2, User Manual, Page: 2 / 27

2 3
Statement:
This device complies with Part 15 of the FCC Rules and IC Rules.
Operation is subject to the following two conditions: (1) this de-
vice may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
Note : This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules and ICES-003 of the IC rules. These limits are
designed to provide reasonable protection against harmful in-
terference in a residential installation. This equipment gener-
ates, uses and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harm-
ful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
Welcome
Congratulations on your purchase of a Interton Remote
Control 2.
Remote Control 2 will allow you to operate your Interton
wireless hearing instruments. It is both an elegant and user-
friendly remote control as well as status reader which gives
you access to wireless functions on your hearing instruments.
The Remote Control 2 can be used to tune both of your hearing
instruments simultaneously. Or you can control both hearing
instruments individually, allowing you to perfectly fine-tune
your hearing instruments to any specific hearing situation.
Please read this manual carefully to fully benefit from the
Remote Control 2. Ask your hearing care professional if you
have any questions.
For further information you can also visit the
www.interton.com/Consumers/hearing-aids/accessories
web site.
For your safety, carefully read the chapter Important Informa-
tion, on pages 31-35
FCC ID: X26RC-2